P.O. Box 890 Cary, NC 27513,USA
+1-919-2183-200

Didactic modules with electric, pneumatic and hydraulic actuators

Didactic modules with electric, pneumatic and hydraulic actuators

Professional training and demonstration; mechatronics training equipment. For electronics

Pneumatic and electrohydraulic workbench

All components used are industrial

Pneumatic components include instant connectors for 4 mm pipes

Electropneumatic component with 4mm instant connection safety cable

The electro-pneumatic components include at least:

Air preparation

Air purification device with 3/2 distribution valve

Allocation block

Pressure regulator with pressure gauge

1 MPa pressure gauge

Manual-mechanical valve

3/2 normally closed valve, operated by button

3/2 NC/NO valve, operated by push button

3/2 normally closed valve, operated by emergency button

FC 3/2 NC valve, operated by roller lever

FC 3/2 NC valve. Operated by one-way roller joystick

3/2 normally closed switch double valve

5/2 valve with 2-position selector

Pneumatic valve

3/2 NC / NO, pneumatic single valve

3/2 NC switching valve

Pneumatic 5/2 single valve pneumatic 5/2 double valve flow control equipment

“OR” function double “OR” valve “AND” function

One-way speed controller (dual) fast exhaust valve

Actuator

Single acting cylinder

Double-acting cylinder with rubber pad

The electromagnetic valve

3/2 NC single solenoid valve

5/2 double solenoid valve

5/2 single solenoid valve

Control module

power supply

A set of electrical inputs (button pad with 3 buttons), a set of 3

relay

Indicator (pilot, buzzer) distributor

Reed automatic switch stroke electric end P/V-V/P converter

Electrical contact pressure switch

Pressure gauge with electrical contacts

A set of 20m blue tube and 20m flexible 4 mm white tube. A set of 10 “T” shaped accessories

Set of 5 plugs, 1/8″

A set of 10 x 4mm plastic plugs

A set of connecting cables

Pipe cutting machine

Box with tray for gas and electricity combination

10 meters tube black. ø6 mm

Tube extractor

 

Hydraulic components include at least:

Differential cylinder CD70F25 / 16-200, with protective cover and connecting device for load cell

WS201

Planetary motor

4/2-way valve 4WE6C6X

4/3-way valve 4WE6G6X

4/3-way valve 4WE6J6X

4/3-way directional valve 4WE6E6X overflow valve DBDH6G1X

Relief valve, pilot operated DB6K1-4X / 50

Pressure reducing valve, direct operation DR6DP1-5X

2-way flow control valve 2FRM6B36-3X throttle valve DRV06-1-1X/V

Throttle check valve DRV06-1-1X / V check valve S6A1.X

Check valve, hydraulic pilot-controlled SV 6 PB1-6X accumulator module

Hydraulic distributor 4x

Close valve

Pressure gauge 0-100 bar with measuring hose

Hose line 630 mm

1000 mm hose line with 90° connector and mini gauge port

Hose line 1500 mm with mini gauge port

Control unit housing version BIBB module

Electric pressure switch

Proximity switch, inductive

Electromagnetic coil cable with LED, type A, black electromagnetic coil cable with LED, type A, gray measuring cable kit, small

Double action cylinder with rubber seal -Electronic pressure sensor with sensor element -Unfastening tool, called Tube-Extracotor -Set of manuals and documentation CD-ROM, Pneumatic electronical slides -Storage box small, Storage box large (Trays for components storage).