Designations and Technical Data:
– Set of didactic equipment for the study of basic hydraulics, electro-hydraulics, proportional hydraulics and hydraulic regulation.
– Double-sided mobile workstation allows the assembly and operation of individual components without the use of tools (components equipped with quick assembly system)
The workstation must be equipped with:
– 1x Mobile cart on wheels with dimensions ±10:
. height 1760mm
. minimum depth 770mm
– 1x Double-sided plate for easy fixing of dimensioned components
. depth 680 mm minimum
– 1x double-sided front panel for inserting electrical components
– 2x Fixed cabinet with at least 3 drawers
– 2x Rubber oil drip tray
– 1x Cable guide
– 1x Hose holder
Set of equipment for the study of hydraulics and electro-hydraulics
– 1x 4/2-way valve with manual operation and spring return
– 1x Manually operated 4/3-way valve, Y-center
– 1x 4/3 manually operated dispenser, closed center
– 1x Check valve
– 1x Pilot operated check valve
– 1x Direct operated pressure relief valve
– 1x bi-directional flow restrictor
– 1x one-way flow restrictor
– 2x Double acting cylinders piston diameter 25mm, rod diameter 16mm maximum and a stroke of 200mm minimum
– 1x Mounting kit for cylinder
– 1x Hydraulic motor with torque drainage 60 Nm
– 1x Load weight of 15 kg maximum with mounting adapted to the cylinder delivered assembled in a grid for safety purposes
– 1x hydraulic membrane accumulator with locking diaphragm.
– 3x Pressure gauge with quick coupling and glycerine bath pressure range 0- 100 bar
– 2x T-distributor with quick coupling
– 1x Shut-off valve
– 2x Module of 3 electrical relays (contacts 3NO-3NC for each relay, coil 24 VDC)
– 1x Module of 3 electric push buttons
– 1x Module of 2 timer relays (2NO-2NC contacts)
– 2x 4/2 monostable electrically driven 4/2 directional control valve (24 VDC coil with excitation indicator light)
– 1x 4/3 spool valve with closed center, electrically controlled (24 VDC coil with excitation indicator light)
– 1x Electronic pressure switch
– 2x Electronic proximity switch
Set of accessories
– 10x Hose with quick couplings, 600 mm
– 6x Hose with quick couplings, 1000 mm
– 4x Hose with quick couplings, 1500 mm
– Set of 4 mm safety laboratory cables (red and blue color) consisting of at least 80 cables
– Power supply unit for mounting frame 220V AC – 24VDC / 10A maximum short-circuit protected.
Hydraulic power unit
– Control unit with integrated circuit breaker and emergency stop
– Single-phase alternating current motor
– Rated voltage: 230 V/50Hz
– Rated power: 1 kW minimum
– Coupled to 2 double pumps (gear or vane pump)
– Flow rate of each pump: 3.5 l/min minimum
– Pressure 50 bar minimum
– Tank capacity 40 Liter minimum with return channel filter.