P.O. Box 890 Cary, NC 27513,USA
+1-919-2183-200

Hot Water Production

Hot Water Production

1 Product overview

1.1 Overview

The heat-absorbing element of the vacuum tube collector is a metal heat-absorbing tube (generally copper or aluminum). The surface of the heat-absorbing plate is a solar selective absorption coating; The upper heat collection tube is welded and the heat absorption tube is made of glass with high light transmittance. The vacuum tube collector is made of all-copper material, and the heat-absorbing coating adopts blue coating and black chrome technology. Each square heat collector plate can replace 150kg of coal burning, which is equivalent to 147 kWh of electricity, and the hot water collection per square is about 80kg and above 50 °C. Adopt double circulation, not easy to scale, can discharge sewage, no pipe burst, not afraid of hail, this collector has a selective absorption coating adjustable collector tilt angle solar circulation station with pump, expansion tank and safety valve measuring instrument.

1.2 Features

The main structure is made of aluminum profiles and plastic-sprayed steel plates, with high structural strength and strong corrosion resistance.
The bottom is equipped with casters for easy movement.

2 Performance Parameters

Dimensions: 1380mm*850mm*2100mm
Vacuum tube collector size: 2000mm*1250mm
Weight of the whole machine: about 200kg
Working conditions:
Ambient temperature 5℃~+40℃ Relative humidity <85%(25℃)

3 Product Composition

1 Vacuum tube collector

2 Safety valve

3 Flow sensor

4 Exhaust valve

5 Temperature sensor

6 Pressure sensor

7 Safety valve

8 Expansion tank

9 Plate heat exchanger

10 Cold water circulation pump

11 Water tank

12 Water tank filling and drainage port

13 Temperature sensor

14 Liquid filling port

15 Drain port

16 Hot water circulating water pump

17 Control box 18 Temperature pressure gauge

3.1 Completable training projects

It is used to study the function and operation principle of evacuated tube collectors.

3.2 Notes

The outer surface of the vacuum tube collector is made of tempered glass, and it is strictly forbidden to impact.
During the experiment, the surface temperature of the pipeline is high, so be careful of burns.
The pressure of the experimental system pipeline needs to reach 2bar for the system to work properly.
During the experiment, each valve must be in a proper position, and the pipeline must be kept unobstructed. Otherwise, equipment damage may occur.
It is strictly forbidden to expose the collector to the sun for a long time when the circulating pump is powered off, so as to avoid the high temperature and pressure in the collector, which may cause danger.
After the experiment, the medium should be emptied, and the drain valve should be kept open.