Equipment Overview
1 Introduction
1.1 Overview
This training system simulate demo wind and solar generate electricity process, enable students to learn
wind and solar generate electricity. This trainer cultivate students hand on ability, it’s suitable for
engineering university, training institute, technical schools.
1.2 Feature
(1)This trainer use aluminum column structure, with inner integrated measurement meters, there is universal wheels at the bottom, it’s easy to move.
(2) It can do many experiment circuit and components, students can combine them to different circuit, do
different experiments and training content.
(3) Training workbench with safety protection system.
Capacity
(1)Wind power generation
(2) Solar energy generation set
(3)Training workbench: aluminum structure
(4) Single solar energy cell plate:
(5) Fan technical:
(6) Battery
(7) Work condition:
Temperature-10～+40℃ Temperature≤80℃
Environment air: no corrosivity air, no fuel air, no large quantity of conductive dust
(8) Power:
3 System introduction
This system can be divided to four part: wind generating electricity system, photovoltaic power
generation system, control system, inverter system . Wind generating electricity system consist of fan,
generator, battery. Photovoltaic power generation system consist of light source, photovoltaic cell plate,
battery. Control system consist of wind and solarcomplementary controller. Inverter system is made
of frequency inverter and load unit.
1.Simulate wind generating electricity set: this system select horizontal axis magnet synchronous generator, use fan to simulate wind, through adjust fan position to change wind strength and direction, to test generator effect in the same condition.
Simulator photovoltaic power generation system:this system use 4 pieces of 30W solar energy board,
You can connect in series or in parallel according to different system pressure. Simulate solar light set
consist of two metal halide, it can adjust the relative position with photovoltaic plate, to simulate solar
light position, and demonstration.
Battery group: it consist of 4 pieces 12V/40AHseal battery group, you can parallel connect use as
12V200AH system, you can also connect in series as 24V/100AH system, and deep understand battery.
Controller hanging box:this hanging box use industrial type charger controller, it can control wind
generator and photovoltaic generator to charge on battery. With LCD display board, you can check
system technical parameter and can set by yourselves. It is with prevent overcharge, over current
Inverter hanging box:adopt 12V/24V voltage intelligent recognize frequency inverter, output voltageis
AC220V, continuously work power is 600W, peak work power is 1000W. Rotary efficiency>90%, low
voltage automatic alarm.
Meter box: it display generator voltage, generator current, charge voltage, charge current, inverter
voltage, inverter current in real time.
3.2 Training workbench
Training workbench use aluminum column structure hold, with universal wheels at bottom, two wheels
are with brake, you can move and fix as your like. Desktop thickness is 25mm high density board,
surface with anti high temperature treatment, equip with three door, with two drawers, the structure is
beautiful.
3.3 Power control panel
(1) Voltage, current output indicator
(2) Equip with power indicator, safety power output terminal.
(3) Inner with AC power source, with short circuit protection function.
Specific characteristics:
Power supply: 120 Volt.
Frequency: 60 Hertz.
Includes: Workstation, Battery Bank, Battery Bank Junction Box, AC Outlets, Metering Instruments, DC Power Distribution Panel, Horizontal and Vertical Disconnect Switches, Bypass Charge Controller, dump, circuit breakers, kwh meters with ac breaker box, ac/dc wall switches and lockout tagout module.
Type: Mobile. Additional characteristics:
Includes power distribution bar, remote control power inverter, solar charge controller, stop switch, adapter socket for DC lamp, photovoltaic (PV) module mounting, wind turbine generator with DC motor, connections of the solar panels, dc motor controller, necessary accessories and cables, mounting instructions, and instructor and student manuals.
600 W solar simulator.
5 minute timer for protection against overheating of the solar simulator.
Includes interface for data acquisition via WAN or LAN network.
Possibility of simulating different wind speeds.
Possibility of practicing generation, storage and conversion (DC to AC and DC to DC) in solar and wind energy.
Possibility of conducting training in installation, operation, maintenance and repair of solar and wind alternative energy systems with real and commercial components.
Includes induction in the use and management of the equipment.
5 Experiment list
Battery feature test:
electricity technical parameter
2) Battery connect in series and parallel
(2) Charge controller experiment:
1) connect inversed protection experiment
2) Controller protection on battery overcharge
3) Controller protection on battery over discharging experiment
4) Anti reverse charge experiment
(3) Simulate wind generating electricity system experiment
(4) Wind energy charging control experiment
(5) Generator work power test experiment
(6) Photovoltaic battery open circuit voltage test experiment
(7) Photovoltaic battery short circuit current test experiment
(8) Photovoltaic battery work power test experiment
(9) To test photovoltaic battery different maximum test experiment under different illumination
(10) Photovoltaic battery output feature experiment
(11) Photovoltaic battery charging control principle experiment
(12)Photovoltaic battery anti reverse charging experiment
(13) Photovoltaic battery connect in series and parallel experiment
(14) Inverter basic principle experiment
(15) Simple inverter output waveform test experiment
(16) Photovoltaic battery connect in series and in parallel experiment
(17) Inverter basic principle experiment
(18) Simple inverter output waveform test experiment
(19) Inverter power drive AC load experiment
(20) Wind and solar generator complementary experiment